1、挑选资质健全、系统完好、名誉较好的胶带生产厂家供货，消除胶带本身质量构成的潜在危险。

1, the selection of qualified, sound, systematic and good reputation belt manufacturer supply, eliminate the potential risk of the quality of the tape itself.

2、胶带受料及转发点漏斗的规划要合理。既要防止构成过高的落差，又要改动煤流方向，使煤流与胶带机运送根本方向共同。

2, the conveyor belt material and forwarding point funnel planning should be reasonable. It is necessary to prevent the formation of too high a drop, but also to change the direction of coal flow, so that the coal flow and conveyor belt conveying the basic direction of common.

3、制止用输送带运送较大体积物件及任何铁器，关于粒度符合需求的物料也要确保温度，防止构成带面掩盖胶的损害、剥离、掉落。

3, to prevent the use of conveyor belts to transport larger objects and any iron, on the size of the material in line with the needs, but also to ensure that the temperature, to prevent the formation of surface covered rubber damage, peeling, falling.

4、从运送系统的源头操控铁器及坚固长条片矸的进入，在运送系统沿途设置必要的破碎机和除铁器。

4, from the source of the conveyor system to control the iron and solid long piece of gangue access, in the transportation system along the necessary crusher and iron remover.

5、输送带库存保管要防止日晒雨淋，关于长期寄存的输送带，有必要进行纵向张力强度实验。

5, storage of conveyor belt, to prevent sun and rain, on long-term storage conveyor belt, it is necessary to carry out longitudinal tensile strength test.

6、关于输送带的导料槽、打扫器等附件设备，平常要进行细心保护，问隙增大或损坏的要及时给予修补或替换。

6, on the conveyor belt guide trough, cleaning device and other accessories, usually to careful protection, ask gap enlargement or damage, should be repaired or replaced in time.

7、滚筒要进行周期性探伤查看，尽早发现裂纹、部分磨损过度等运转危险。

7, the drum to conduct periodic inspection, as soon as possible to detect cracks, excessive wear and tear and other parts of the risk of running.