移动式输送机正式运行前应将轮子用三角木楔住或用制动器刹住。以免工作中发生走动，有多台输送机平行作业时，机与机之间，机与墙之间应有一米的通道。
Wheels of mobile conveyors should be wedged with triangle wood or braked with brakes before they are put into operation. In order to avoid moving in the work, when there are several conveyors working in parallel, there should be a one-meter channel between the machine and the machine, and between the machine and the wall.
输送机使用前须检查各运转部分、胶带搭扣和承载装置是否正常，防护设备是否齐全。胶带的涨紧度须在启动前调整到合适的程度。
Before using the conveyor, it is necessary to check whether the running parts, belt buckles and carrying devices are normal, and whether the protective equipment is complete. The tension of the tape must be adjusted to an appropriate degree before starting.
皮带输送机应空载启动。等运转正常后方可入料。禁止先入料后开车。
Belt conveyor should start without load. It can be fed only after normal operation. It is forbidden to drive after feeding.
有数台输送机串联运行时，应从卸料端开始，顺序起动。全部正常运转后，方可入料。
When several conveyors are running in series, they should start from the unloading end and start in sequence. Feeding is not allowed until all of them are in normal operation.