湖南长沙诚信养老院

1、注意不同类型、规格层数的输送带不宜接在一起使用，其接头最好采用胶接法。 2、输送胶带，块度大，磨损性大的物料和使用固定梨的卸料装置应尽量采用低速。 3、输送机的传动滚筒直径与输送带布层的关系、传动滚筒、改向滚筒的配套以及对托辊槽角的要求应根据运输机的设计规定，合理选取。 4、输送胶带的类型、结构、规格、层数应根据使用条件合理选用。 5、贮存时仓库温度宜保持一18-40℃之间，相对湿度宜保持在50-80%之间。

1, pay attention to different types and specifications of the conveyor belt should not be used together, the best use of adhesive bonding. 2. Conveyor belt, large block, large wear material and the use of fixed pear unloader should try to use low speed. 3, the relationship between the diameter of the transmission roller and the conveyor belt, the matching of the transmission drum, the change drum and the slot angle of the supporting roller should be selected according to the design regulations of the transport aircraft. 4. The types, structures, specifications and layers of the conveyer belt should be selected according to the conditions of use. 5. The storage temperature of the warehouse should be kept between 18-40 centigrade, and the relative humidity should be kept between 50-80%.